Features and functions:

The produced masks are 150 × 220mm

 

Equipment overview: equipment components and workflow

1. Feeding area: 4 rolls of raw material can be fed at the same time. An automatic alarm is triggered when materials are used up.
2. Nose clip feed: high speed feed
3. Ultrasonic Roll Forming: Allows precisely control the position of the nose clip.
4. Ear loop welding: The length of the ear strap is easily adjustable and the material is automatically detected.
5. Folding welding: welding in a reciprocating motion mode, the size of the mask can be controlled and adjusted using the touch screen.
6. Cutting and Chopping: The cutter is moved to the chopping position.

 

Installation and configuration requirements:

• Equipment size: about 7200mm (L) × 1500mm (W) × 2000mm (H);
• Appearance color: gray if there are no special requirements;
• Working power: equipment AC 380V ± 5%, 50Hz, rated power about 15KW;
• Compressed air: 0.6 ~ 0.8MPa, the flow rate is about 300L / min;
• Using conditions: temperature 10 ~ 35 ℃, humidity 5-35% HR, no flammable and corrosive gases, no dust (purity level not less than 100,000).
• Equipment weight ≤5000 kg, floor load ＜ 500 kg / m2;

 

Basic structure:

№	Name	Quantity	Notes
1	Basement for material feed	1
2	Nose clip feed frame	1
3	Super Lubo Roll Forming Line	1
4	Ear Loop Welding Line	1
5	Folding welding line	1
6	Cutting and chopping line	1
7	Ear strap welding machine	1
8	Conveyor of finished products	1

 

Mask shape:

The mask shape is for reference only (made according to client’s requirements).